How Strong is this Radiant Barrier Foil?
Even though our product can easily be cut with a knife, once it is in place it will not tear, rip or sag. You can staple one end, pull the foil across a section, staple the other end, and then fill in the install with just a few more staples. This equates to a faster, virtually hassle-free installation. This product will never sag or fall down due to age and/or windy conditions, this product is made to last. This is not kitchen foil; kitchen foil is thin and will tear very easily if applied in an attic, and some kitchen foil is not pure aluminum, WarehouseFoil™ is 99.5% pure aluminum – this is the best radiant barrier you can buy.
For technical specs on any product other than the Original WareHouseFoil™ Radiant Barrier Foil (heavyweight perforated aluminum product), contact us. All testing done via: UNITED STATES TESTING COMPANY, INC.
|Product||double-sided (single sided foil radiant barrier also available), reflecting, 99% pure aluminum foil with inner woven polyethylene scrim|
|Weight||28.6lb per 1,000 square foot roll +/- 2%|
|Thickness||5 mils thick (this is about the thickness of a business card or camping tarp)|
|Tensile Strength||test method ASTM D-828|
|Machine Direction||83.7lb/in width|
|Cross Direction||70.1lb/in width|
|Flame Spread||10 ASTM E84|
|Smoke Development||10 under ASTM E84 testing|
|Water Vapor Permeability||72g/m 2/24hr; 14 perms ASTM E96|
|Temperature Range||-76°F to 212°F ASTM C411|
|Thermal Properties||emissivity 0.03 (reflects 97% of infrared heat) ASTM E408|
|Delamination||All WareHouseFoil™ radiant barrier products are manufactured using PE lamination welding, not adhesives; the product layers are actually fused together so delamination is NEVER an issue with our products.|
Double-sided (DS) foil available in both perforated (breathable) and solid (vapor barrier) versions.
Single-sided (SS) foil available in both perforated (breathable) and solid (vapor barrier) versions.
Foil + White Vinyl side available in both perforated (breathable) and solid (vapor barrier) versions.